• Adopting high gain 25dBi antenna to boost signals for HDTV.
• Made of high-quality metal, signal transmission is faster and more stable.
• 360 degree no dead angle receiving signal, more convenient to use.
• High frequency of VHF(172-240Mhz)/ UHF(470-860Mhz) with high sensitivity plus high gain 25dBi ensure the stability and smoothness of signal transmission. Give you a great watching TV enjoyment.
• This antenna receives multiple kinds of signals, including ATSC, DVB-T, DVB-T2, ISDB. It is compatible with 720P, 1080i, 1080P/ ATSC. Enabling you to enjoy HD videos.
• This high gain antenna widens the signal receiving/ transmitting range to 200 miles, which allows you to get more signals, thus more HD TV programs.
• This magnetic base TV signal amplifier antenna supports plug and play. No need for drive or software.

How to Use:

Step 1: connect the end(f-male) of an attached coaxial cable to the ANT/IN connector on the back of the TV or DVB-T tuner.

Step 2: In the TV’s setup menu, set the tuner mode to “Antenna” or “Air”. for more detailed instructions, please refer to your TV manual.

Step 3: In the Tv’s setup menu, set TV to “scan” for channels. this can sometimes be listed as auto-program, auto-scan, channel search or channel scan. consult the TV manual for detailed instructions.

Step 4: if the reception is sporadic, try moving the antenna to another location and rescanning the TV until the optimal position is found.

Step 5: fix the antenna at the optimal position you found.

Note:

1. Placing the antenna higher or close to/in a window may result in better reception. you must rescan whenever you move the antenna.
2. If you use a flat HDTV, please go through your TV manual to make sure your TV comes with a built-in tuner for Freeview.
3. You need to retune your Freeview TVs and digital receiver from time to ensure you are reserving all available services. retuning takes only a few minutes and can be done with your remote control.
4. TV reception capacity depends on the distance among your home, transmitting tower and surrounding environments.

Specification:

Type: DVB-T2 Antenna
Material: Metal
Working frequency: VHF(172-240Mhz)/ UHF(470-860Mhz)
Impedance: 75Ω
LNA high gain: 25dBi
Signal range: 200 miles
Receiving signal: ATSC, DVB-T, DVB-T2, ISDB
Compatibility: 720P, 1080i, 1080P/ ATSC
Cable length: approx. 3 meters/ 10ft
Connector: F male
Voltage: 5V
Power consumption: 20mA
Working temperature: -45-85℃
Storage temperature: -45-85℃

Package Includes:

• 1 x 200-mile Antenna with 2 Amplifier