Car Sound Deadening Mat Sound Deadener Material Insulation

Viewing This Product
FREE Shipping on orders over $49!

Don't miss a chance to get an extra 50 % of the quality and efficiency of just 30 % of the price. Now the material is 1,5 times thicker that will get you 1,5 times more effective insulation. 80 mil is 1,5 times better in comparison to sound deadening material of 50 mils and just 30 % more expensive. The thicker the material the more performance you get!
How to install
Please read the instruction carefully up to the end! This is really important as the efficiency of soundproofing doesn't only depend on the material you use but largely on the installation sequence as well. Please note that the incorrect installation of a sound deadening material might lead to undesirable results or no results at all.
Decide what part of the car you want to insulate first: roof, floor, doors, or a hood. The insulation of each part of the vehicle has its own result and contribution to the overall outcome. That’s why we recommend you to soundproof all parts of the car for the maximum soundproofing output. Locate the guideline instruction to your car on the internet and carefully read as to how to dismantle certain panels. Be careful when you take off plastic trim parts to avoid breaking the fixings! Very detailed information can be found on automotive forums.
Remove the remains of the factory insulation once you have dismantled the interior ( you need to do that if the factory sound insulation is damaged or not properly fixed). You can leave it there if it’s still in a good shape. Properly clean and degrease the surface prior to the installation of deadener. It has to be dry and clean! It won’t be properly fixed and may not last long if you apply the material on a wet or dirty surface. Use a degreaser and dry clean rag for Step 4. We also recommend wearing gloves and air the room from time to time while doing it. * Pre-try the degreaser on a small spot before using that on a painted or plastic exterior.
Measure the pre-cleaned surface of the prospective spot that you are going to treat. We recommend you first make a pattern of an appropriate size on paper and then transfer that to the insulation sheet. This will help you to place everything accurately and avoid wasting the material. Use a stationery knife or construction scissors to trim the desired piece of insulation sheet. Be careful and use gloves for your hand protection.
Try to locate the piece of material onto the prospective surface of a car without removing an adhesive paper. Make sure that the material covers it. Now it’s time to remove the release paper. Please do not remove it at once. You need to do it gradually for better adhesion. Now when your sheet is ready to be used, lay that down to the surface and let it glue. Properly flatten the sheet with hands to avoid air bubbles between the metal and insulation material. Use a roller for rolling down the foil as a next step. You can find a special pattern on the foil that helps to see if it's rolled down properly. You have to roll down the foil till it is plain and smooth, and you cannot see the convex foil texture.
Notes:
- Material for inside use only.
- The allowed temperature is from -49F to 212F.
- Don’t use the material in high-temperature parts of the car such as the exhaust pipe.
- The material cannot be reused after dismantled.
- The material can be used only on clean dry metal surfaces.
- Please observe the safety precautions.
Don't miss a chance to get an extra 50 % of the quality and efficiency of just 30 % of the price. Now the material is 1,5 times thicker that will get you 1,5 times more effective insulation. 80 mil is 1,5 times better in comparison to sound deadening material of 50 mils and just 30 % more expensive. The thicker the material the more performance you get!
How to install
Please read the instruction carefully up to the end! This is really important as the efficiency of soundproofing doesn't only depend on the material you use but largely on the installation sequence as well. Please note that the incorrect installation of a sound deadening material might lead to undesirable results or no results at all.
Decide what part of the car you want to insulate first: roof, floor, doors, or a hood. The insulation of each part of the vehicle has its own result and contribution to the overall outcome. That’s why we recommend you to soundproof all parts of the car for the maximum soundproofing output. Locate the guideline instruction to your car on the internet and carefully read as to how to dismantle certain panels. Be careful when you take off plastic trim parts to avoid breaking the fixings! Very detailed information can be found on automotive forums.
Remove the remains of the factory insulation once you have dismantled the interior ( you need to do that if the factory sound insulation is damaged or not properly fixed). You can leave it there if it’s still in a good shape. Properly clean and degrease the surface prior to the installation of deadener. It has to be dry and clean! It won’t be properly fixed and may not last long if you apply the material on a wet or dirty surface. Use a degreaser and dry clean rag for Step 4. We also recommend wearing gloves and air the room from time to time while doing it. * Pre-try the degreaser on a small spot before using that on a painted or plastic exterior.
Measure the pre-cleaned surface of the prospective spot that you are going to treat. We recommend you first make a pattern of an appropriate size on paper and then transfer that to the insulation sheet. This will help you to place everything accurately and avoid wasting the material. Use a stationery knife or construction scissors to trim the desired piece of insulation sheet. Be careful and use gloves for your hand protection.
Try to locate the piece of material onto the prospective surface of a car without removing an adhesive paper. Make sure that the material covers it. Now it’s time to remove the release paper. Please do not remove it at once. You need to do it gradually for better adhesion. Now when your sheet is ready to be used, lay that down to the surface and let it glue. Properly flatten the sheet with hands to avoid air bubbles between the metal and insulation material. Use a roller for rolling down the foil as a next step. You can find a special pattern on the foil that helps to see if it's rolled down properly. You have to roll down the foil till it is plain and smooth, and you cannot see the convex foil texture.
Notes:
- Material for inside use only.
- The allowed temperature is from -49F to 212F.
- Don’t use the material in high-temperature parts of the car such as the exhaust pipe.
- The material cannot be reused after dismantled.
- The material can be used only on clean dry metal surfaces.
- Please observe the safety precautions.
Shipping: We Ship Worldwide! Fast shipping to The United States.
We offer FREE Shipping for all orders over $49 - no coupon needed!
FLAT RATE SHIPPING & HANDLING RATE – ONLY $4.99!
Delivery Estimate: Due to high demand on this one of a kind item, please allow 2 - 3 weeks for delivery.
In some extreme cases it might take up to 4 weeks for delivery.
Orders are processed between 2-3 business days.
Our typical delivery times are below:
USA: 2-3 weeks| Canada: 2-4 Weeks
Europe: 2-4 weeks| UK: 2-6 weeks| Australia: 2-3 weeks
Other International: 2-6 weeks depending on location
For more information please click HERE.
Our Guarantee
We truly believe we carry some of the most innovative products online, and we want to make sure we back that up with our risk-free ironclad 30 Days Guarantee.
If you don't have a positive experience for ANY reason, we will do WHATEVER it takes to make sure you are 100% satisfied with your purchase.
Buying items online can be a daunting task, so we want you to realize that there is absolutely ZERO risk in buying something and trying it out. If you don't like it, no hard feelings we'll make it right.
We have 24/7/365 Ticket and Email Support. Please contact us if you need assistance.
Don't miss a chance to get an extra 50 % of the quality and efficiency of just 30 % of the price. Now the material is 1,5 times thicker that will get you 1,5 times more effective insulation. 80 mil is 1,5 times better in comparison to sound deadening material of 50 mils and just 30 % more expensive. The thicker the material the more performance you get!
How to install
Please read the instruction carefully up to the end! This is really important as the efficiency of soundproofing doesn't only depend on the material you use but largely on the installation sequence as well. Please note that the incorrect installation of a sound deadening material might lead to undesirable results or no results at all.
Decide what part of the car you want to insulate first: roof, floor, doors, or a hood. The insulation of each part of the vehicle has its own result and contribution to the overall outcome. That’s why we recommend you to soundproof all parts of the car for the maximum soundproofing output. Locate the guideline instruction to your car on the internet and carefully read as to how to dismantle certain panels. Be careful when you take off plastic trim parts to avoid breaking the fixings! Very detailed information can be found on automotive forums.
Remove the remains of the factory insulation once you have dismantled the interior ( you need to do that if the factory sound insulation is damaged or not properly fixed). You can leave it there if it’s still in a good shape. Properly clean and degrease the surface prior to the installation of deadener. It has to be dry and clean! It won’t be properly fixed and may not last long if you apply the material on a wet or dirty surface. Use a degreaser and dry clean rag for Step 4. We also recommend wearing gloves and air the room from time to time while doing it. * Pre-try the degreaser on a small spot before using that on a painted or plastic exterior.
Measure the pre-cleaned surface of the prospective spot that you are going to treat. We recommend you first make a pattern of an appropriate size on paper and then transfer that to the insulation sheet. This will help you to place everything accurately and avoid wasting the material. Use a stationery knife or construction scissors to trim the desired piece of insulation sheet. Be careful and use gloves for your hand protection.
Try to locate the piece of material onto the prospective surface of a car without removing an adhesive paper. Make sure that the material covers it. Now it’s time to remove the release paper. Please do not remove it at once. You need to do it gradually for better adhesion. Now when your sheet is ready to be used, lay that down to the surface and let it glue. Properly flatten the sheet with hands to avoid air bubbles between the metal and insulation material. Use a roller for rolling down the foil as a next step. You can find a special pattern on the foil that helps to see if it's rolled down properly. You have to roll down the foil till it is plain and smooth, and you cannot see the convex foil texture.
Notes:
- Material for inside use only.
- The allowed temperature is from -49F to 212F.
- Don’t use the material in high-temperature parts of the car such as the exhaust pipe.
- The material cannot be reused after dismantled.
- The material can be used only on clean dry metal surfaces.
- Please observe the safety precautions.

Shipping: We Ship Worldwide! Fast shipping to The United States.
We offer FREE Shipping for all orders over $49 - no coupon needed!
FLAT RATE SHIPPING & HANDLING RATE – ONLY $4.99!
Delivery Estimate: Due to high demand on this one of a kind item, please allow 2 - 3 weeks for delivery.
In some extreme cases it might take up to 4 weeks for delivery.
Orders are processed between 2-3 business days.
Our typical delivery times are below:
USA: 2-3 weeks| Canada: 2-4 Weeks
Europe: 2-4 weeks| UK: 2-6 weeks| Australia: 2-3 weeks
Other International: 2-6 weeks depending on location
For more information please click HERE.
Our Guarantee
We truly believe we carry some of the most innovative products online, and we want to make sure we back that up with our risk-free ironclad 30 Days Guarantee.
If you don't have a positive experience for ANY reason, we will do WHATEVER it takes to make sure you are 100% satisfied with your purchase.
Buying items online can be a daunting task, so we want you to realize that there is absolutely ZERO risk in buying something and trying it out. If you don't like it, no hard feelings we'll make it right.
We have 24/7/365 Ticket and Email Support. Please contact us if you need assistance.
